Cannabis Remediation Machine: CuraFlo™ Cold Plasma
CuraFlo™ is a cold plasma cannabis remediation machine that knocks down yeast, mold and bacteria on post-harvest flower — no heat, no chemicals, no radiation. Recover failed or at-risk batches and get them back to market.
Book a 15-Min ROI Call See PricingWhat Is a Cannabis Remediation Machine?
A cannabis remediation machine reduces microbial contamination — total yeast and mold (TYMC), aerobic bacteria and other microbes — on harvested flower so it can meet state microbial testing limits. Most systems on the market use X-ray, radio frequency (heat) or ozone gas.
CuraFlo™ uses cold plasma. It generates reactive species at near-room temperature that break down microbes on the surface of the flower, then dissipate. Terpenes, potency, color and bag appeal stay intact.
See state rules on our cannabis remediation by state page and the data on our validation page.
One Failed Microbial Test Costs $50K–$500K
Destroyed product, lost shelf space, re-testing and missed contracts. A cannabis mold remediation system turns a failed batch into a recovered batch — and turns remediation from a scramble into a documented, repeatable SOP.
Recover Failed Batches
Treat flower that failed TYMC and re-submit for testing instead of sending it to destruction.
Protect At-Risk Harvests
Run borderline lots before compliance testing to reduce the chance of a fail.
Keep Quality Intact
No heat, so no terpene burn-off. <0.2% THC variance across validation batches VAL-001 to VAL-003.
No Radiation Licensing
Non-ionizing. No shielding, no radiation safety officer, no ozone off-gassing, no chemical residue.
Cold Plasma vs. Other Cannabis Decontamination Methods
| Factor | CuraFlo™ Cold Plasma | X-Ray / E-Beam | Radio Frequency | Ozone |
|---|---|---|---|---|
| Typical equipment cost | $59,995 | $250K–$385K+ | $300K+ | Varies |
| Ionizing radiation | No | Yes | No | No |
| Radiation license / shielding | Not required | Often required | Not required | Not required |
| Heat applied to flower | No | No | Yes | No |
| Gas off-gassing / residue | No ozone residue | No | No | Ozone venting needed |
| Terpene & potency impact | <0.2% THC variance | Low | Heat-related risk | Oxidation risk |
Cost ranges reflect publicly listed equipment pricing; check state rules for approved remediation methods.
How CuraFlo™ Works
- Baseline panel. We review your microbial lab results to set run parameters for your contamination profile.
- Load. Place post-harvest flower in the CuraFlo™ PX5 chamber.
- Treat. Cold plasma reduces yeast, mold and bacteria at near-ambient temperature.
- Test. Send to your licensed lab. Document every run for your SOP and compliance file.
Built for Licensed Operators
Cultivators
Indoor, greenhouse and outdoor growers fighting botrytis, powdery mildew and post-harvest mold.
Processors & Vertical Operators
Bring remediation in-house instead of shipping product out and waiting.
Labs & Distributors
Help clients clear quarantined inventory with a documented remediation step.
Cannabis Remediation Machine Price
CuraFlo™ PX5: $59,995. One-year warranty. Lease and financing options available — see financing. A fraction of the cost of X-ray or e-beam systems.
Not ready to buy? Toll remediation (pay per pound) is available through Bliss 710 in Mississippi.
Book a 15-Min ROI CallCannabis Remediation FAQ
How much does a cannabis remediation machine cost?
X-ray and e-beam systems typically run $250,000–$385,000+. The CuraFlo™ PX5 cold plasma cannabis remediation machine is $59,995, with lease options.
Does cold plasma affect THC or terpenes?
Validation batches VAL-001 to VAL-003 showed <0.2% THC variance. Cold plasma runs at near-ambient temperature, so there is no heat to drive off terpenes.
How much yeast and mold does CuraFlo™ remove?
CuraFlo™ achieved >99.8% total yeast and mold (TYMC) reduction across validation batches. Results depend on starting bioburden and contamination type, which is why we start with a baseline lab panel.
Do I need a radiation license?
No. Cold plasma is non-ionizing. No radiation license, shielding or radiation safety officer is required.
Is cold plasma remediation allowed in my state?
Remediation rules vary by state. Some states require approval of the remediation method. Book a call and we’ll walk through your state’s requirements.
Can I try it before buying?
Toll remediation (pay per pound) is available through Bliss 710 in Mississippi. Ask about demo and trial options on your ROI call.
Stop Destroying Failed Batches
Operator-to-operator: 15+ years in cannabis, 200+ dispensary and cultivation transactions. Let’s run the numbers on your facility.
Book a 15-Min ROI Call